Audio Amplifiers
ATLAS 120 Watt 6 Input Mixer Amplifier, AA120
$499.00
120 Watt 6 Channel Mixer Amplifier
5 Mic/Line Inputs with Phantom Power and 1 Stereo Summing AUX Input
Bridge In/Out Circuit with Balanced Link / Internal Relay to Engage Circuit is Perfect for Small Room Combining Systems Eliminating the Need for External Electronics
Pre Out / Power Amp In for Patching External Processors
Remote or VOX Mute Capabilities
Zone 2 MOH Out from CH6 Line Source
SPECO 20 Watt 12vdc Mobile Amplifier with Mic, PAT20TB
$99.00
Talk-back feature turns a remote speaker (not included) into a listening device for two-way conversations
Includes push to talk handheld CB style microphone Includes mounting hardware
RMS Output Power: 12W/Max. Output Power...22W
Power Supply: DC 11V to 16V
Speaker Outputs: 4/8 Ohms
Inputs:1 x Mic (1/4"), 1 x Aux (1/4")
Dimensions:5.1" (W) x 1.25" (H) x 4.5" (D)
Includes Microphone
SPECO 60W RMS P.A. Mixer Amplifier, PMM60A
$449.00
RMS Output Power: 60 Watt
Speaker Ouput: 4/8/16 Ohms, 70/25V
Inputs: 3 x Mic (XLR), 1 x Mic (XLR or Terminal)
3 x Mic/Aux (Terminal or Stereo RCA), 1 x EQ/Mix (RCA)
1 x TEL (Terminal)
SPECO 15W PA Amplifier, PVL15A
$129.00
RMS Output Power: 15W
Max. Output Power: 30W
Power Supply: AC 120V, 50/60Hz
Speaker Outputs: 4/8/16 Ohms, 70/25V
Inputs: 2 x Mic (1/4" and 1/4" or XLR) 1 x Aux (1/4")
Frequency Response: 50Hz ~ 15KHz 50Hz ~ 15KHz
Dimensions: 8.25" (W) x 3" (H) x 7.9" (D)
VANCO Spot for Dot Amplifier, SPOTFD1
$279.99
In-wall amplifier that is powered and controlled by the Amazon Echo Dot
Flush mounts the Amazon Echo Dot into a wall or ceiling for a clean look with no exposed wiring
Can be used with almost any in-wall, in-ceiling, or in-room speaker
25 Watts x 2 Channels 8 Ohm
40 Watts x 2 Channels 4 Ohm
110-240 V 50/60Hz
Can support up to 4 speakers being connected through a single amp
Auxiliary audio input to run from another source
White and almond faceplates included
Amazon Echo Dot sold separately
QSC RMX850a Power Amplifier, RMX-850A
$699.00
Independent user-defeatable clip limiters reduce distortion
Selectable low-frequency filters (30 Hz or 50 Hz) protect speakers and increase headroom
Balanced 1/4-inch (6.3 mm) TRS, XLR, and barrier strip inputs
Touch-proof binding post and Neutrik Speakon® outputs
Front mounted gain controls for easy access
Signal and clip LED indicators for monitoring performance
Independent DC and thermal overload protection on each channel automatically protects amplifier and speakers
3-year warranty plus optional 3-year extended service contract
VANCO 30W 2-CH Wall Plate Amplifier with Bluetooth, PA230WP
$99.00
2x30W Class D Wall Plate Amplifier with Bluetooth wireless technology
3.5mm analog stereo input
4 Ohm/8 Ohm stable
Supports auto source switching with priority for Bluetooth enabled source
Three minute link-lost timeout function
Fits easily into a single gang low-voltage box
ATLAS 4-Input, 100-Watt Mixer/ Amplifier with Automatic System Test (PHD), AA100PHD
$699.00
Rear Mounted DIP Switch Allows Mute Receive for Inputs 2 and 3
Contact Closure Mute Terminals
Variable Mute Sensitivity Control for Input 1
Preamp In for External Processors
Line Output
Remote Input Select (RIS)
Remote Level Control
Input Assignable Zone 2 Output
Two Unbalanced, Summing Line Level Inputs
Two Balanced Mic/Line/Tel Inputs w/ Phantom Power
Automated Diagnostic System Test (Push Here Diagnostic®)
100W into 25V/70.7V and 4Ω Loads
PHILMORE Mini Amplifier, PA305
$59.90
Power per channel: 10 watts RMS x 2 (into 8-ohm speakers from 20 to 20,000 Hz with 0.2 percent THD)
Audio inputs: one 3.5mm input and one stereo analog (left/right) RCA input
Audio outputs: left/right speaker - level outputs
Speaker terminals: Push Button
Size: 4-3/4" x 2-1/2" x 1-1/2"
Color is silver-gray...not black as pictured
VANCO Class D Digital Amplifier 8 OHM 60W, PA2X60
$249.00
Class D Digital Amplifier
RCA and 1/8” Stereo Inputs
Mixes audio when both inputs are connected and live
Stereo and Mono/Bridge Modes
Automatically goes into standby after 5 minutes of inactivity
Source Sensing to come out of standby when a connected source begins to play
AC 115/230V IN
VANCO Class D Digital Amplifier 8 OHM 25W, PA2X25
$129.00
Class D Digital Amplifier
RCA and 1/8” Stereo Inputs
Mixes audio when both inputs are connected and live
Stereo and Mono/Bridge Modes
Automatically goes into standby after 5 minutes of inactivity
Source Sensing to come out of standby when a connected source begins to play
AC 115/230V IN
ATLAS 35 Watt 3 Input Mixer Amplifier, AA35G
$299.00
FREQUENCY RESPONSE:
50Hz - 20kHz
CONNECTOR TYPE:
Phoenix and RCA
OUTPUT POWER:
35 Watts
RACK UNITS:
2 high 1/2 wide
HEIGHT:
4.1" (104mm) Including Feet
WIDTH:
9.5" (241mm)
DEPTH:
13.9" (353mm) Front of Knobs to Back Panel
ATLAS 4-Input, 50-Watt Mixer/ Amplifier with Automatic System Test (PHD), AA50PHD
$399.00
50W into 25V/70.7V and 4Ω Loads
Rear Mounted DIP Switch Allows Mute Receive for Inputs 2 and 3
Contact Closure Mute Terminals
Variable Mute Sensitivity Control for Input 1
Preamp In for External Processors
Line Output
Remote Input Select (RIS)
Remote Level Control
Input Assignable Zone 2 Output
Two Unbalanced, Summing Line Level Inputs
Balanced Mic/Line/Tel Input w/ Phantom Power
Automated Diagnostic System Test (Push Here Diagnostic®)
ATLAS 60 Watt 3 Input Mixer Amplifier, AA60G
$429.99
Ideal for paging, background music, and music-on-hold applications
Balanced mic/line input, zone 2, and dual RCA stereo music inputs
Priority muting by VOX or external switch
Bass and Treble controls on master output
Secondary Zone 2 Output 1 W & 600 Ω /MOH
Universal AC Power Supply for use in any 120V to 240V system
70V, 100V, or 8Ω amplifier output
Signal presence LED indicators
QSC GX3 Power Amp, GX-3
$499.00
300W at 8 ohms / 1 kHz per channel (both channels driven)
Power levels matched to the most popular speakers used by entertainers
Optimized for maximum real-world headroom into 4- and 8-ohm speaker systems
Inputs: XLR, 1/4" TRS and phono input connectors for compatibility with any source
Outputs: Speakon combo accepts 1/4" (TS) plugs or Speakon 2- and 4-pole plugs (connects 2 poles only). Binding posts support all other speaker wiring systems
Minimum depth chassis (10.1" / 257 mm) fits in compact, inexpensive effects racks
Detented gain controls for precise setting and matching of sensitivity
GuardRail automatically protects the amplifier and loudspeakers from damage due to temperature rise or overdrive without shutting down the show
Front panel LEDs monitor power, signal, and clipping
Subwoofer/satellite crossover built-in
QSC GX5 Power Amp, GX-5
$599.00
500W at 8 ohms / 1 kHz per channel (both channels driven)
Power levels matched to the most popular speakers used by entertainers
Optimized for maximum real-world headroom into 4 ohm and 8 ohm speaker systems
Inputs: XLR, 1/4" TRS and phono input connectors for compatibility with any source
Outputs: Speakon combo accepts, 1/4" (TS) plugs or Speakon 2-pole and 4-pole plugs (connects two poles only). Binding posts support all other speaker wiring systems
Minimum depth chassis (10.1" / 257 mm) fits in compact, inexpensive effects racks
Detented gain controls for precise setting and matching of sensitivity
GuardRail automatically protects the amplifier and loudspeakers from damage due to temperature rise or overdrive without shutting down the show
Front panel LEDs monitor power, signal and clipping
Subwoofer/satellite crossover built-in
ATLAS 40 Watt 3 Input Mixer Amplifier, MA40G
$269.00
One Balanced Mic/Line/Tel Input w/Phantom Power
2 Unbalanced, Summing Line Level Inputs
Variable VOX Mute Sensitivity Control for Input 1
Contact Closure Mute Terminals
Global Power Supply, 100VAC-240VAC ~ 50/60Hz
Compact 1RU, 1/2 Rack
ATLAS 60 Watt 3 Input Mixer Amplifier, MA60G
$449.00
One Balanced Mic/Line/Tel Input w/Phantom Power
2 Unbalanced, Summing Line Level Inputs
Variable VOX Mute Sensitivity Control for Input 1
Contact Closure Mute Terminals
Global Power Supply, 100VAC-240VAC ~ 50/60Hz
Compact 1RU, 1/2 Rack
RUSSOUND Two-Channel Dual Source Amplifier 75 Watt, P75
$149.00
Crosstalk: > 70dB @ 1 kHz
Frequency Response: 10Hz to 30kHz +0.0dB/- 3.0dB @ 8 ohms, 1 W
Input Sensitivity: 900mV for 50W at 8 ohms
Power Output: 60W per channel at 8 ohms
Power Requirement(s): 120VAC 60Hz 4.2A
Signal to Noise Ratio: 100dB A-weighted
VANCO Class D Digital Amplifier 8 OHM 120W, PA2X125
$379.00
Class D Digital Amplifier
RCA and 1/8” Stereo Inputs
Mixes audio when both inputs are connected and live
Stereo and Mono/Bridge Modes
Automatically goes into standby after 5 minutes of inactivity
Source Sensing to come out of standby when a connected source begins to play
AC 115/230V IN
ATLAS 120 Watt 6 Input Mixer Amplifier, AA120G
$699.00
120 Watt 6 Channel Mixer Amplifier
4 Mic/Line Inputs with Phantom On/Off per Mic and 2 Stereo Summing AUX Inputs
Bridge In/Out Circuit with Balanced Link / Internal Relay to Engage Circuit is Perfect for Small Room Combining Systems Eliminating the Need for External Electronics
Pre Out / Power Amp In for Patching External Processors
Remote or VOX Mute Capabilities
Special Low Cut Filter is 6dBu/octave at 400Hz and also Bypasses Front Panel Bass Control to Allow Use with Paging Horns like APX40TN and AP-15T
Zone 2 MOH Out from CH6 Line Source
UL60065 Listed