Terminal
ECLIPSE All-in-One Crimper/Stripper Tool, 100-002
$7.90
This crimper is for generic red, blue & yellow insulated and non-insulated terminals
Strips: AWG 10, 12, 14, 16, 18, 20-22 Cut Bolts: 4-40, 6-32, 8-32, 10-24, 10-32
Crimps Insulated: AWG 22-18, 16-14, 12-10
Crimps Non-Insulated: AWG 22-18, 16-14, 12-10
KLEIN All-Purpose Pliers with Crimper, J207-8CR
$47.99
Strips 10-18 AWG Solid Wire
12-20 AWG Stranded Wire
Crimps non-insulated connectors, lugs and terminals
ECLIPSE Pin Extractor .130" OD .110" ID, 902-398
$16.50
Extracts pins and sockets from commonly used connectors such as AMP
KLEIN Ratcheting Crimper, 10-22 AWG - Insulated Terminals, 3005CR
$29.97
Crimps insulated terminals onto 10-22 AWG stranded copper wire
Adjustable compound action design puts more crimping power into each squeeze
Three crimping cavities in one tool: 22–16 AWG (Red), 16–14 AWG (Blue) and 12–10 AWG (Yellow) terminals
Built-in ratchet ensures full-cycle crimping for a uniform crimp every time
Unique cavity design provides consistent crimp from either side of the tool
Dial adjusts the amount of force applied to the crimp
Dual-material molded grips provide added comfort
KLEIN Klein-Kurve Heavy-Duty Wire Stripper 8-20 AWG, K12035
$34.97
Strips 8 to18 AWG Solid and 10 to 20 AWG Stranded wire
Large knurled plier tip pulls and twists wire
Shear cutting knives for easier cutting of copper wire and larger material such as Romex® cable (all sizes) and other nonmetallic (type NM) sheathed cable
Screw shearing for 6-32 and 8-32 screws
Wire looping hole
Klein-Kurve™ comfort grip handles for reduced hand fatigue
Hot riveted joint prevents wobble and separation of the blades over time
Textured grips for enhanced dexterity and integrated hang holes
Romex® is a registered trademark of Southwire Company
ECLIPSE Crimper Pliers for Telecom Splices, 100-008
$14.98
UY, UG & UR connectors
Built-in stop to protect against over crimping
Side cutter
Insulated handles
ECLIPSE Ratcheted Crimper for Red/Blue/Yellow Term, 300-002
$39.90
Ratcheted Crimper for Red/Blue/Yellow Terminals
Application:
Red, Yellow, Blue Insulated terminals
Nylon and Vinyl
Crimp Size:
AWG 22-18/ 16-14/ 12-10
ECLIPSE Flat Cable IDC Crimper, 300-011
$22.03
For crimping IDC-type of connectors onto flat cables
Application: DC-type connectors Height: 6mm~27.5mm Width(Max): 55mm
Overall Length: 240/9.4
ECLIPSE Heavy Duty Crimping Tool for AWG 8 to 250 MCM, 300-107
$138.84
Two capacity plates-Aluminum and copper
Crimps terminals from AWG 8 to 250 MCM
Adjustable w/ knob on top of tool
Overall length 22.5"
WIHA Soft Grip Ferrule Crimping Pliers, 32604
$25.68
High Quality forged C70 Tool Steel
Induction Hardened Cutting Edges and Jaws
Soft Vinyl Grip Handles are Oil and Solvent Resistant
For End Ferrule Crimps
ECLIPSE Terminal Crimp Kit with Ratcheting Crimper, 500-037
$55.13
Ratcheted Crimper
Ring insulated Terminal (22-16 AWG & Stud size: #6 ) X 50 pcs
Ring insulated Terminal (16-14 AWG & Stud size : #8) X 40 pcs
Ring insulated Terminal (12-10 AWG & Stud size : #10) X 20 pcs
Butt Splice insulated (22-16 AWG) x 30 pcs
Butt Splice insulated (16-14 AWG) x 20 pcs
Butt Splice insulated (12-10 AWG) x 15 pcs
PHILMORE Ratchet Crimp Tool for .062/.093 Contacts, 61-394
$39.90
Crimps male pins and female sockets
For .062" and .093" diameter
Works for the 61-xxx series connectors
PHILMORE Heavy Duty Cut and Crimp Tool, 63-601
$14.90
Cuts #10 - 22 AWG Wire
Crimps Insulated and Uninsulated terminals
PHILMORE Crimp Tool for DC-S & DC-H Terminals 6-20awg, 49-900
$34.90
For DC-S & DC-H terminals, crimps 20-6 AWG wire
PHILMORE High Density D-Sub Crimp Tool, 63-603
$19.48
Used for high density D-Sub crimp contacts
Also works with crimp type locking connectors
