Selectors
RUSSOUND Dual Source Speaker Selector In-Wall White, AB-1.2WHITE
$39.90
Connector(s): Detachable 4-pole color-coded snap connectors
Dimensions in Wall Box: 1.0" (W) x 2.75" (H) x 1.75" (D), (2.5 x 7.0 x 4.5 cm)
Max Wire Size: 14 AWG (1.9 mm)
Power Handling: 150 watts RMS per channel
RUSSOUND Single Source Four-Pair Impedance Matching Speaker Selector, SS-4.2
$99.00
Connector(s): Spring terminals
Frequency Response: 20 Hz - 20 kHz +/- 0 dB
Max Wire Size: 12 AWG (2.4 mm)
Power Handling: 100 watts per channel peak, 100 watts per channel RMS
RUSSOUND Dual Source Six-Pair Speaker Selectors with Volume Control, SDB-6.1
$399.00
Connector(s): Detachable 4-pole color-coded snap connectors
Impedance Matching Type: Autoformer
Max Wire Size: 14 AWG (1.9 mm)
Power Handling: 150 watts RMS continuous per channell
Speaker Impedance: 4 ohms
Volume Control: 12 steps; total attenuation 42 dB
Zone Audio Controls: Volume knob, on/off, Amplifier A/B switch
RUSSOUND Dual Source Four-Pair Speaker Selector with Volume Control, SDB-4.1
$349.00
Connector(s): Detachable 4-pole color-coded snap connectors
Impedance Matching Type: Autoformer
Max Wire Size: 14 AWG (1.9 mm)
Power Handling: 200 watts RMS continuous per channell
Speaker Impedance: 4 ohms
Volume Control: 12 steps; total attenuation 42 dB
Zone Audio Controls: Volume knob, on/off, Amplifier A/B switch
RUSSOUND Dual Source Two-Pair Speaker Selectors with Volume Control, SDB-2.1
$199.00
Connector(s): Detachable 4-pole color-coded snap connectors
Impedance Matching Type: Autoformer
Max Wire Size: 14 AWG (1.9 mm)
Power Handling: 100 watts RMS continuous per channell
Speaker Impedance: 4 ohms
Volume Control: 12 steps; total attenuation 42 dB
Zone Audio Controls: Volume knob, on/off, Amplifier A/B switch
RUSSOUND E-Z Connector Speaker Terminal Block, EZB-8
$49.00
Connector(s): Removable screw down connectors
Max Wire Size: Up to 12 AWG
Power Handling: 150 watts RMS per channel
Frequency Response: Flat
RUSSOUND Automatic Speaker Selector, AB-3.2
$99.00
Connector(s): Detachable 4-pole color-coded snap connectors
Delay Range: 0-30 seconds
Indicators: Power, Status
Max Wire Size: 14 AWG (1.9 mm)
Min Trigger Level: 15 mV
Power Handling: 200 watts per channel into 8 ohms, 100 watts per channel into 4 ohms
Power Requirement(s): 12 VDC 300 mA (US power supply included)
RUSSOUND Dual Source Two-Way Speaker Selector, AB-2.2
$79.00
Connector(s): Detachable 4-pole color-coded snap connectors
Dimensions in Wall Box: 5.5" (W) x 2.875" (H) x 3.0" (D), (14.0 x 7.3 x 7.6 cm)
Max Wire Size: 14 AWG (1.9 mm)
Power Handling: 150 watts RMS per channel
VANCO 4 Pair Stereo Speaker Selector Box, SS4
$49.90
Low profile speaker selector unit that allows for distribution of high level (amplified) stereo signals into four zones.
Features a manually activated impedance protection circuit that can be activated to prevent the impedance to a receiver- this protection keeps the receiver from dropping below 5 Ohms- regardless of the impedance rating of the speakers utilized
Impedance protection can also be de-activated- allowing for part of a planned system of impedance with matching volume controls- resulting in great sound quality in every zone.
Two Sets of Electrical Safety Devices for Safeguarding the Stereo Amplifier have been Installed to Protect the Stereo Amplifier Against Shorting of Lines and/or Open Speaker Connectors
Rated 70 Watts Continuous per Channel
10 Ohm Impedance
Accepts 14 to 18 AWG Speaker Wire
Push-pin Terminal Connections
Dimensions: 8.5” W x 1.8” H x 4.5” D
