Optoelectronics
NTE IR Receiver Module for Remote Control Systems 38kHZ 3-lead case 2pk, 31000-2
$3.47
Very Low Supply Current
Photo Detector and Preamplifier in One Package
Internal Filter for PCM Frequency
Improved Shielding Against EMI
Supply Voltages: 2.5V to 5.5V
Improved Immunity Against Ambient Light
Insensitive to Supply Voltage Ripple and Noise
NTE LDR-Photoresistor 5mm 150VDC Light Resistance 5-10K Ohm Dark Resistance 0.2M Ohm 10pk, 02-LDR2
$2.90
Epoxy Encapsulated
Small Size
Reliable Performance
Quick Response
High Sensitivity
Good Characteristic of Spectrum
Specifications
Power Dissipation (mW): 90
Light Resistance (10Lux)(KΩ): 5-10
Dark Resistance (KΩ): .5
Response Times
Increase: 30
Decrease: 30
Maximum Voltage: 100VDC
Spectral Response Peak: 540nm
Ambient Temperature Range: −30 to +70 C
NTE LDR-Photoresistor 5mm 150VDC Light Resistance 100-200K Ohm Dark Resistance 10M Ohm 10pk, 02-LDR3
$2.90
Epoxy Encapsulated
Small Size
Reliable Performance
Quick Response
High Sensitivity
Good Characteristic of Spectrum
Specifications
Power Dissipation (mW): 100
Light Resistance (10Lux)(KΩ): 100-200
Dark Resistance (KΩ): 10.0
Response Times
Increase: 30
Decrease: 30
Maximum Voltage: 100VDC
Spectral Response Peak: 540nm
Ambient Temperature Range: −30 to +70 C
NTE Infrared(IR) LED Emitter 5mm 940nm tinted blue lens round head with flange 5pk, 30116-5
$3.90
Chip Material: GaAlAs
Lens: Tinted Blue
Peak Wavelength: 940nm
Viewing Angle: 20
NTE Optoisolator NPN Transistor Output 80V 50mA, 3223-4
$2.42
High Current Transfer Ratio (80% min)
High Isolation Voltage (5.3kVRMS, 7.5kVPK)
High BVCEO (80Vmin) A
NTE Optoisolator NPN Transistor Output 80V 50mA, 3223-2
$1.42
High Current Transfer Ratio (80% min)
High Isolation Voltage (5.3kVRMS, 7.5kVPK)
High BVCEO (80Vmin)
NTE Optoisolator NPN Transistor Output 80V 50mA, 3223-1
$0.87
High Current Transfer Ratio (80% min)
High Isolation Voltage (5.3kVRMS, 7.5kVPK)
High BVCEO (80Vmin)
NTE Infrared Emitting Diode T1-3/4 5mm 950nm, 3017
$3.88
Low Forward Voltage
High Radiant Power and Radiant Intensity
Suitable for DC and High Pulse Current Operation
High Reliability Standard T−1 3/4 (5mm) Package
NTE LDR-Photoresistor 5mm 150VDC Light Resistance 50-100K Ohm Dark Resistance 5M Ohm 10pk, 02-LDR1
$2.90
Epoxy Encapsulated
Small Size
Reliable Performance
Quick Response
High Sensitivity
Good Characteristic of Spectrum
Specifications
Power Dissipation (mW): 100
Light Resistance (10Lux)(KΩ): 50-100
Dark Resistance (KΩ): 5.0
Response Times
Increase: 30
Decrease: 30
Maximum Voltage: 100VDC
Spectral Response Peak: 540nm
Ambient Temperature Range: −30 to +70 C
NTE LED-5mm Infrared Emitting Diode 940nm For Use In Remote Controls/smoke Detectors, 3027
$3.25
High Radiant Intensity
Peak Wavelength = λP = 940nm
Low Forward Voltage
High Reliability
OSEPP Light Sensor Module, LIGHT-01
$3.95
Suitable supply voltage: +3 to 5Vdc
Analog voltage output: 0 to 5 Vdc
Detects ambient light density
Works with CdsPhotoresistor
Interface with microcontrollers and logic circuits Analog sensors
Uses PH 2.0 socket
Special sensor with Arduino expansion boards
PHILMORE Cadmium Sulfide Photo Cell 2pk, 10810
$4.02
10mm OD...400mWEpoxy - Coated Low Profile CellHigh reliable power dissipation Compact dimensions
PHILMORE Cadmium Sulfide Photo Cell 3pk, 10807
$3.54
7mm OD...150mW
Epoxy - Coated Low Profile Cell
High reliable power dissipation
Compact dimensions
PHILMORE Cadmium Sulfide Photo Cell 3pk, 10805
$2.26
5mm OD...125mW
Epoxy - Coated Low Profile Cell
High reliable power dissipation
Compact dimensions