Crimpers

Items 1 to 36 of 50 total

Grid List

WIHA Soft Grip Ferrule Crimping Pliers, 32604

$25.68
High Quality forged C70 Tool Steel Induction Hardened Cutting Edges and Jaws Soft Vinyl Grip Handles are Oil and Solvent Resistant For End Ferrule Crimps

ECLIPSE Terminal Crimp Kit with Ratcheting Crimper, 500-037

$55.13
Ratcheted Crimper Ring insulated Terminal (22-16 AWG & Stud size: #6 ) X 50 pcs Ring insulated Terminal (16-14 AWG & Stud size : #8) X 40 pcs Ring insulated Terminal (12-10 AWG & Stud size : #10) X 20 pcs Butt Splice insulated (22-16 AWG) x 30 pcs Butt Splice insulated (16-14 AWG) x 20 pcs Butt Splice insulated (12-10 AWG) x 15 pcs

PHILMORE Ratchet Crimp Tool for .062/.093 Contacts, 61-394

$39.90
Crimps male pins and female sockets For .062" and .093" diameter Works for the 61-xxx series connectors

PHILMORE Heavy Duty Cut and Crimp Tool, 63-601

$14.90
Cuts #10 - 22 AWG Wire Crimps Insulated and Uninsulated terminals

KLEIN All-Purpose Pliers with Crimper, J207-8CR

$47.99
Strips 10-18 AWG Solid Wire 12-20 AWG Stranded Wire Crimps non-insulated connectors, lugs and terminals

ECLIPSE Pin Extractor .130" OD .110" ID, 902-398

$16.50
Extracts pins and sockets from commonly used connectors such as AMP 

KLEIN Ratcheting Crimper, 10-22 AWG - Insulated Terminals, 3005CR

$29.97
Crimps insulated terminals onto 10-22 AWG stranded copper wire Adjustable compound action design puts more crimping power into each squeeze Three crimping cavities in one tool: 22–16 AWG (Red), 16–14 AWG (Blue) and 12–10 AWG (Yellow) terminals Built-in ratchet ensures full-cycle crimping for a uniform crimp every time Unique cavity design provides consistent crimp from either side of the tool Dial adjusts the amount of force applied to the crimp Dual-material molded grips provide added comfort

ECLIPSE Heavy Duty Crimping Tool for AWG 8 to 250 MCM, 300-107

$138.84
Two capacity plates-Aluminum and copper Crimps terminals from AWG 8 to 250 MCM Adjustable w/ knob on top of tool Overall length 22.5"

ECLIPSE Ratcheted Crimper for Red/Blue/Yellow Term, 300-002

$39.90
Ratcheted Crimper for Red/Blue/Yellow Terminals Application: Red, Yellow, Blue Insulated terminals Nylon and Vinyl Crimp Size:  AWG 22-18/ 16-14/ 12-10

KLEIN Klein-Kurve Heavy-Duty Wire Stripper 8-20 AWG, K12035

$34.97
Strips 8 to18 AWG Solid and 10 to 20 AWG Stranded wire Large knurled plier tip pulls and twists wire Shear cutting knives for easier cutting of copper wire and larger material such as Romex® cable (all sizes) and other nonmetallic (type NM) sheathed cable Screw shearing for 6-32 and 8-32 screws Wire looping hole Klein-Kurve™ comfort grip handles for reduced hand fatigue Hot riveted joint prevents wobble and separation of the blades over time Textured grips for enhanced dexterity and integrated hang holes Romex® is a registered trademark of Southwire Company

ECLIPSE All-in-One Crimper/Stripper Tool, 100-002

$7.90
This crimper is for generic red, blue & yellow insulated and non-insulated terminals Strips: AWG 10, 12, 14, 16, 18, 20-22 Cut Bolts: 4-40, 6-32, 8-32, 10-24, 10-32 Crimps Insulated: AWG 22-18, 16-14, 12-10 Crimps Non-Insulated: AWG 22-18, 16-14, 12-10

ECLIPSE Crimper Pliers for Telecom Splices, 100-008

$14.98
UY, UG & UR connectors Built-in stop to protect against over crimping Side cutter Insulated handles

ECLIPSE Flat Cable IDC Crimper, 300-011

$22.03
For crimping IDC-type of connectors onto flat cables Application: DC-type connectors Height: 6mm~27.5mm Width(Max): 55mm Overall Length: 240/9.4

PHILMORE High Density D-Sub Crimp Tool, 63-603

$19.48
Used for high density D-Sub crimp contacts Also works with crimp type locking connectors

ECLIPSE Ratchet Crimp Tool for LMR400 Hex size .118 and.429, 300-163

$39.67
Crimps Amphenol connectors, Coaxial - Belden 7810A, 9913, 9914, LMR 400 HEX .429", .118" HEx 10.89, 3.00mm

ECLIPSE Ratched Coax Crimper for RG-58,59,62 AU BNC & TNC, 300-019

$39.90
RG58, 59 and 62 AU, BNC and TNC 3-piece connectors HEX .068", .213", .256" HEX 1.73, 5.41, 6.5mm

KLEIN Ratcheting Pass-thru Modular Crimper, VDV226-110

$49.97
Fast, reliable modular crimp-connector install tool for voice and data applications with Pass-Thru RJ45 connector plugs All-in-one tool cuts, strips and crimps paired-conductor data cables Trims flush to end face of connector eliminating unintended contact between conductors Crimps and trims Klein Tools RJ45 Pass-Thru™ Connectors Crimps 4, 6 and 8 position modular connectors (RJ11/RJ12 standard and RJ45 Klein Tools Pass-Thru™) Full-cycle ratchet mechanism ensures complete connector termination On-tool wiring guide helps minimize wiring errors Cable parameters: 28-22 AWG flat or round; solid or stranded telephone and data Rubber grip for added comfort Ratcheting locking mechanism Use with Klein Tools Pass-Thru™ Connectors Not for use with standard (non Pass-Thru™) connectors Replacement blade set available (VDV999-076)

KLEIN Compression Crimper, VDV211-063

$62.99
One tool for both inside (premises) and outside (utility) cabling. Crimps most compression F, BNC, and RCA connectors to majority of coaxial cables: Mini-coax, RG58, RG59, RG6, RG62, RG6QS, RG7, and RG11. Adjustable universal plunger ensures optimized crimping on multiple types of connectors.