Audio
Audio equipment, cables and accessories like nowhere else. Make "You-do-it" Electronics Center your convenient one-stop shop. If you don't see what you're looking for, call or email us.
ROLLS Hum Eliminator, HE18
$64.90
Frequency response: 20Hz to 70 kHz +/- .5dB
Distortion: < 0.005% THD @ 1 khz
Crosstalk: > -97 dB
Max source impedance: 1 K Ohm
Min load impedance: 10 K Ohm
Eliminates ground loop hum and buzz.
Leaves signal grounds connected.
Passive, the unit requires no power.
Converts balanced lines to unbalanced lines and vice-versa.
Adjusts signal voltages to match difference in ground potential.
ROLLS Smartphone Breakout Box, CPB7
$99.00
The CPB7 is completely passive, requires no power.
Smart Phone cable included.
Powder coated steel chassis.
ROLAND USB Audio Interface 4X4, RUBIX44
$299.99
4-in/4-out USB audio interface
4 low-noise mic preamps with XLR combo jacks
Hardware compressor/limiter
Hi-Z input for guitar and other high impedance sources
MIDI In/Out ports
Extensively shielded, low-noise design
Sturdy and compact metal construction
Big, easy-to-read indicators show vital information
Low latency, class compliant drivers
Ground lifts for quiet operation in a variety of venues
Includes Ableton Live Lite
VANCO Toslink/Digital Coax to Toslink/Digital Coax Audio Converter with Dual Outputs:, 280565
$29.90
Converts Coaxial digital audio signals to Toslink digital audio signals; Converts Toslink digital audio signals to Coaxial digital audio signals
Switch between either Coaxial or Toslink source to output both Coaxial and Toslink formats
Accepts stereo or surround (up to 5.1ch) audio signals via Coaxial or Optical
Built in signal enhancement that repeats digital audio signals to extend up to double the transmission distance
Supports sampling rate at 32, 44.1, 48, 96, and 192KHz
Power Supply: 5V DC
Dimensions: 2.24” W x .96” H x 2.18” D
VANCO Digital Audio over Single Cat5e/Cat6 Cable Extender, 280531
$129.00
Application: Allows digital signals to be transmitted using a single Cat5e or Cat6 cable
Transmission Range: Up to 330 ft (100 meters)
Accepts Digital Coax or Optical Toslink
Supports Digital 5.1 (DTS- Dolby Digital- etc.)
High performance- zero signal loss
Data Transmission Rate: 12.8 Mb/s
S/PDIF (Digital Coax): 96 kHz performance
Power Supply: 12V DC- transmitter side
Dimensions: 2.75” W x 1.25” H x 2.5” D
ROLAND USB Audio Interface 2X2, RUBIX22
$149.99
2-in/2-out USB audio interface
2 low-noise mic preamps with XLR combo jacks
Hi-Z input for guitar and other high impedance sources
MIDI In/Out ports
Extensively shielded, low-noise design
Sturdy and compact metal construction
Big, easy-to-read indicators show vital information
Low latency, class compliant drivers
Ground lifts for quiet operation in a variety of venues
Includes Ableton Live Lite
VANCO Premium Digital to Analog Audio Converter Dolby Approved, 280515
$59.90
Dolby Digital Approved
Converts coaxial or Toslink digital audio signals to analog L/R audio
Select toggle switch is used to choose Coaxial or Toslink as the input
Supports DTS/Dolby Digital audio source
Built-in Dolby/DB HD, the DTS HD, LPCM/LPCM with decoding
24-bit S/PDIF incoming bit stream on left and right channels
Supports a full range of 32k, 44k, 1k, 48k, 64k, 88.2k, 96k, 192k
Provides electromagnetic-noise-free transmission
Easy to install and simple to operate
Power Supply: 5V DC
UL Listed
ALTO Stealth Wireless Expander Pack, STEALTH XPANDER KIT
$249.00
Single-channel receivers (x2) with one XLR output (per unit)
Adds additional active loudspeakers to your Stealth Wireless System
VANCO Digital To Analog Audio Converter, 280512
$49.90
Converts Coaxial or Toslink digital audio signals to analog L/R Audio
Supports sampling rate at 32, 44.1, 48, and 96 KHz
24-bit S/PDIF incoming bit stream on left and right channels
Provides electromagnetic noise free transmission
Power Supply: 5V DC
UL Listed
Dimensions: 1.625" W x 1" H x 2.5" D