Because our price on this item is lower than the manufacturer's
suggested retail price , the manufacturer does not allow us to show
you our price until you place the item in your shopping cart.
Adding this item won't require you to purchase the product. You
can easily remove the product from your cart if you decide not to buy it.
When you think of chemicals for electronics, think of "You-do-it" Electronics Center. Cleaners, lubricants, dusters, freeze sprays, coatings, solvents, shielding and more. If you don't see what you're looking for, call or email us.
Solder type
1,080 copper donut pads in a grid size 27 x 40
Pads spaced upon .10" centers, board thickness: 1/16"
Corner mounting holes are .140" diameter and spaced approximaately 2.83" apart on smaller side and 4.00" apart on the long side
1.9" x 3.0" board with a total of 400 solder type donut pads/holes
Material: FR-4 fiberglass
Will match with RH20 push-in protoboard
.042" diameter holes with copper donut surrounds
Holes spaced 0.10" centers
Board thickness is 1/16"
1.2" x 3.0" board with a total of 300 solder type donut pads/holes
Will match with RH20 push-in protoboard
.042" diameter holes with copper donut surrounds
Holes spaced 0.10" centers
Board thickness is 1/16"
Creates a flexible, wterproof bond that never becomes brittle
An all-purpose adhesive and vinyl mender that bonds almost anything to anything
Hundreds of uses for repairs, arts, crafts, hobbies and many other projects
The “Do Everything Adhesive” is made in the USA
Use to bond and repair hard plastics, metals, wood, tile, china, fabric, rubber, leather, vinyl, ceramics and much more
Stops leaks in containers, pipes and hoses
Can be used as weather-stripping
Dries clear
2 mils thick
Silicone adhesive
Very high heat resistant
Superior tensile strength
Eases release of heated objects
Protects printer bed
RoHS and REACH compliant
Dimensions: 2.835" x 3.70"
750 pre-tinned copper donut pads on one side of the board
Grid is 25 x 30 pads rectangle
(4) Mounting holes are 0.140" diameter on 2.50" and 3.38" centers
Board thickness: 1/16"
2-Boards per package
Dimensions: 1.77" x 1.77"
221 pre-tinned copper donut pads on one side of the board
Grid is 15 x 15 pads square
(4) Mounting holes are 0.140" diameter on 1.54" centers
Board thickness: 1/16"
Package of 2
560 copper donut pads in a 20 x 28 grid
Copper solder pads are spaced on .100" centers
Pads will accommodate small component leads, ICs and header pins
(4) mounting holes 0.140" spaced 2.24" and 2.92" centers
1/16" board thickness
(3) Boards per package
Solder type board with 285 copper donut pads - single sided on 0.10" centers
15 x 19 grid
(4) Mounting holes are 1/8" diameter spaced on 1.6" x 2.0" centers
Board thickness: 1/16"
100% HFC 152A gas
Economical
Ozone safe
Non-VOC
Non-flammable aerosol*
Zero residue
High flow delivery system
Suitable for use in food facilities as a Non-Food Chemical – Canadian and NFS recognition letters available on request
Filtered to 0.2 microns
100% HFC 134A gas
Ozone safe
Non-flammable
Non-conductive
Zero residue
Variable valve allows greater user controlariable valve allows greater user control
100% HFC 152A gas
Economical
Ozone safe
Non-VOC
Non-flammable aerosol*
Zero residue
High flow delivery system
Suitable for use in food facilities as a Non-Food Chemical – Canadian and NFS recognition letters available on request
Filtered to 0.2 microns