Cell Phone Accessories

Compatible with any camera: includes standard 1/4-20" ball and GoPro ball Fits round and oblong bars: 7/8" (min) to 1-1/4" (max) Non-slip rubberized inserts Internal structured ribs design for high-strength holding power Fully Adjustable: 210° Tilt, 360° Turn and 360° Rotation Premium Materials: made of custom, engineered composites and light-weight aluminium Ideal for: bicycles, motorcycles, ATVs or any round or semi-round tube

6" (152.4mm) overall mount length Includes two mounting bases that screw easily into the machined aluminum alloy shaft [0.875� (22.2mm) in diameter] Use the Tri-Foot Base [4� (101.6mm) outside diameter with three 0.265� (6.7mm) holes on a 3.25� (82.5mm) bolt circle] for solid surfaces, or the T-Bar Clip for drop ceiling rails Full range of motion at the camera: 210� Tilt, 360� Turn & 360� Rotation Knob and tamper-resistant set-screw adjusting options included 1/4-20 mounting stud with lockring

6" (152.4mm) overall mount length Includes two mounting bases that screw easily into the machined aluminum alloy shaft [0.875� (22.2mm) in diameter] Use the Tri-Foot Base [4� (101.6mm) outside diameter with three 0.265� (6.7mm) holes on a 3.25� (82.5mm) bolt circle] for solid surfaces, or the T-Bar Clip for drop ceiling rails Full range of motion at the camera: 210� Tilt, 360� Turn & 360� Rotation Knob and tamper-resistant set-screw adjusting options included 1/4-20 mounting stud with lockring

Magnet holds up to 5 lbs. (2.3kg) in a vertical pull. Base is 2.75" (69.8mm) in diameter and 0.385" (9.8mm) thick 1/4-20 mounting stud

 9" (228.6mm) overall mount length Both adjusting points have a full range of motion: 210� Tilt, 360� Turn & 360� Rotation 1/4-20 mounting stud with lockring Shafts are machined aluminum alloy 0.875� (22.2mm) in diameter Knob and tamper-resistant set-screw adjusting options included Square mounting base for solid surfaces, 2.5� x 2.5� (63.5mm x 63.5mm), with four 0.219� (5.56mm) holes on 2.0� (50.8mm) x 2.0� (50.8mm) layout

The world's most versatile camera mounts with twice the positioning power! The preferred choice for installations with demanding requirements. 6" (152.4mm) overall mount length Both adjusting points have a full range of motion: 210� Tilt, 360� Turn & 360� Rotation 1/4-20 mounting stud with lockring Shafts are machined aluminum alloy 0.875� (22.2mm) in diameter Knob and tamper-resistant set-screw adjusting options included Square mounting base for solid surfaces, 2.5� x 2.5� (63.5mm x 63.5mm), with four 0.219� (5.56mm) holes on 2.0� (50.8mm) x 2.0� (50.8mm) layout

Combine with PanaVise 809 Series Suction Cup Mounts to mount devices to your windshield Adds extra versatility to all 809 series window mounts Ideal for steeper pitched windshields Adds 3" to overall mount length Includes installation hex key 812-03 Extension installation instructions:(copy and paste into browser address bar) http://www.panavise.com/812-03.pdf

AMPS-compatible mounting plate with an adjusting point under the electronics. Overall mount length (including the shaft) is 10" (254.0mm) Patented "pinch design" prevents the flex shaft from coming loose from the base or the mounting plate Rectangular AMPS pattern: 30mm x 38mm (1.181" x 1.496") on center We've added an adjusting point under the AMPS-compatible mounting plate with 210° Tilt, 360° Turn & 360° Rotation Knob and set-screw adjusting options included Double wound shaft, vinyl coated for heavy-duty protection Base can be mounted vertically or horizontally; the shaft easily screws into either configuration Screw caps included for a finished look

Adapter for your Garmin (NUvi, Zuma and C-Series) and any product compatible with a 17mm ball/socket. Install this adapter on to your AMPS pattern device including PanaVise InDash Mounts, Pedestal and Flex Mounts. Will also adapt to any 17mm diameter ball socket. Works with most Motorola cradles

AMPS-compatible. Knob and set-screw adjusting option included. Overall mount height (including shaft) is 4" (101.6mm) 210� Tilt, 360� Turn & 360� Rotation under the component  Aluminum, zinc and steel construction Rectangular AMPS pattern: 30mm x 38mm (1.181" x 1.496") on center Concave Standard Foot evenly distributes the mounting load, accommodates slightly irregular surfaces, will not crack, and measures 2.5 x 2.5 � (63.5mm x 63.5mm)