Motor Controllers

Ideally suited for interfacing between low−level digital logic circuitry and high−power peripheral loads High−voltage, high−current Darlington arrays in an 18−Lead DIP type package and feature peak load current ratings to 600mA for each of the eight drivers in each device Typical loads include relays, solenoids, stepping motors, multiplexed LED and incadescent displays, and heaters

100% Arduino Compatible L298 dual h bridge driver Reverse motor polarity (motor direction)

Mate with Arduino and Arduino compatible boards Provides connectors to support 2 servos. Servo power supply can be configured to source from the servo power terminal block or from the Arduinos 5V pin. Support up to 4 bi-directional DC motors with individual 8-bit speed selection, and up to 2 stepper motors (unipolar or bipolar) with single coil, double coil or interleaved stepping. Motor power supply can be configured to source from the motor power terminal block or from the Arduinos VIN pin. Support motors operating between 4.5V to 25V DC. Includes two L293D Quad H-Bridges chipset that can provide 0.6A per bridge (1.2A peak) with thermal shutdown protection, internal kickback protection diodes. Provides DIP sockets to support other pin compatible motor bridge chipset. Integrated pull down resistor to keep motor disable during start up. Individual LED indicator for motor power supply state and servo power supply state. Brings out the Arduinos reset button to the top of the shield