Test Equipment

Measures all light produced by all visible colors of LED, fluorescent lamp, metal-halide lamp, high voltage sodium lamp or electric incandescent lamp Measuring range is up to : 0.00~200000 Lux / 0~20000 FC Built-in high precision photo diode sensor and color correction filter for indoor use Both digits and analog bargraph display Auto and manual range: Relative and peak value measurement Max./Min. value display, low battery indication, LUX/FC unit, auto power off, backlight, data hold, zero calibration

A & C weighting network selection Measuring range from 30 to 130 dB LCD display with backlight High speed (FAST)/Low speed (SLOW) response rate selection Extra functions: Max./Min.value, Data Hold, Auto range, Backlight, Good anti-interference performance, Auto power off

Waterproof (IP67) 5.5mm camera lens 3" Color LCD monitor with 1920 x 1080 resolution 6 adjustable LEDs with 3 brightness levels Built-in auxilliary light illuminates darkened work areas for inspection Screen view rotates 180° 3X zoom Built-in clock/calendar View captured video/images on the display or transfer to your PC using the USB interface or removable microSD card (64GB max) Store up to 4k images on the included 4GB microSD card Supports 8 languages Includes 5.5mm camera probe with 5m cable, 5V Li-Po rechargeable battery, microSD card, USB cable, camera accessories (magnet, hook, mirror) and case

8mm waterproof (IP67) camera with 2.5ft (0.77m) flexible cable 4.3” 640 x 480 TFT LCD monitor 2X digital zoom Image mirroring and image rotation

IP (H.265) and Analog (AHD 2.0, HD-TVI 3.0, HD-CVI 3.0, and NTSC/PAL) security camera tester Provides an RS485 port for PTZ control of analog PTZ cameras POE for IP cameras or 12VDC to analog cameras Ethernet and network tests; Capture snapshots and video recordings; Generate video test patterns for monitor checking

Fast response detection of gas leakage Detects combustible gases - Liquefied Natural Gas (LNG) and Liquefied Propane Gas (LPG) from 500 to 6500ppm Highly sensitive detection circuitry Audible and visual alarm Continuous operation up to 4 hours LED indicators for gas leakage and static absorption

The USB-Bug will dTest Power (0 to 99.9W), Voltage (3.2 to 30VDC) and Current (0 to 3A) on USB 2.0 and USB 3.0 charging ports with over-voltage, under-voltage and over-current indicators Measure capacity (in mAh) to verify output of portable battery pack Intelligent charging feature automatically selects the safest maximum current for your phone or tablet (charging your phone or tablet up to 50% faster) Dual output for charging two USB devices off of one USB 3.0 port; One port is a specially designed masked port to charge your phone or tablet without any data being transferred

Test voice (RJ11/12), data (RJ45) and video (coax F-connector) terminated cables with clearly defined results Measure cable length (up to 2,000 feet) Test for Open, Short, Miswire or Split-Pair faults Backlit LCD screen displays cable length, wiremap, cable ID and test results Trace cables, wire pairs and individual conductor wires with multiple style tone generator (requires analog probe Cat. No. VDV500-123; sold separately) Hub blink mode to identify port location on a hub or a switch LanMap™ and CoaxMap™ Location Remotes (5 each) map and ID multiple cable runs in a single step Includes voltage warning, shield detection, auto power off, low battery indicator and a self-storing remote Auto Power-off feature to conserve battery life (9V included) Kit includes: Scout® Pro 3 Tester, (1) self-storing remote, (5) LanMap™ RJ45 locator remotes, (5) CoaxMap™ F-connector locator remotes, (1) coax F-connector, manual and 9V battery